Are you looking for the muffler weld putty? Do you know what to consider before buying one? Well, we’ve managed to put together a list of the best muffler weld putty for your consideration. You can choose one and use it according to your needs.

In most cases, customers lack knowledge about market conditions, which leads to poor purchasing decisions. Fortunately, you have come to the right place as we will present you with a complete guide on how to select the muffler weld putty for you. We have searched for hours and spent a lot of time and effort making sure you get a good return on your hard-earned money.

You can find a quick comparison and a list of the top muffler weld putty below if you’re short on time.

Our Premium Picks!

EDITOR’S CHOICE
9.9
Versachem Muffler Weld Repair & Sealer, 6.0oz

Versachem Muffler Weld Repair & Sealer, 6.0oz

PREMIUM PICK
9.5
J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick – 2 oz. , Grey

J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick - 2 oz. , Grey

PREMIUM CHOICE
9.1
Blue Magic 18003 High Temperature Metal Repair, 3 oz.

Blue Magic 18003 High Temperature Metal Repair, 3 oz.

Best muffler weld putty

Versachem Muffler Weld Repair & Sealer, 6.0oz

EDITOR’S CHOICE

Specifications:

Versachem Muffler Weld Repair & Sealer, 6.0oz

$10.70
$9.56
 in stock
7 new from $9.56
Free shipping
Amazon.com
as of June 19, 2022 3:04 pm

Features

  • Use on: Muffler, resonator, tailpipe, other exhaust system components
  • Temperature Resistance: 1000°F (continuous) and 1500°F (intermittent)
  • Seals out poisonous fumes.
  • Waterproof
  • Resistant to monoxide gases.

J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick – 2 oz. , Grey

PREMIUM PICK

Specifications:

J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick - 2 oz. , Grey

$9.60
$7.98
 in stock
12 new from $7.98
Free shipping
Amazon.com
as of June 19, 2022 3:04 pm

Features

  • J-B WELD HIGHHEAT: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild materials that will be exposed to high temperatures in automotive and industrial maintenance applications. J-B Weld HighHeat is designed for DIY repairs on exhaust manifolds, tail pipes, mufflers, engine blocks, duct work and other various high temperature projects.
  • CURE AND SET TIME: After kneading the two part formula together by hand, HighHeat takes 1 hour to set and cures in 8 hours. J-B Weld HighHeat set and cure color is machine grey.
  • PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat has lap shear strength of 800 PSI at room temperature and 600 PSI at 400oF (204oC) or more. HighHeat is able to withstand continuous heat up to 450oF (232oC) and intermittent heat of 500oF (260oC). HighHeat is 3x stronger at higher temperatures than conventional epoxy puttys and can be tapped and drilled.
  • MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

Blue Magic 18003 High Temperature Metal Repair, 3 oz.

PREMIUM CHOICE

Specifications:

Blue Magic 18003 High Temperature Metal Repair, 3 oz.

$9.00
$7.90
 in stock
8 new from $7.90
Free shipping
Amazon.com
as of June 19, 2022 3:04 pm

Features

  • Welds cracks and holes in iron and steel
  • Withstands temperatures to 2400 degrees Fahrenheit
  • Strength increases with heat
  • Fills cracks, holes and pits
  • Great for boilers, stoves, barbeques, furnaces, heaters

J-B Weld MufflerSeal Muffler Cement Plastic Tube 12 oz, Model Number: 37912

Specifications:

J-B Weld MufflerSeal Muffler Cement Plastic Tube 12 oz, Model Number: 37912

$10.59  in stock
Amazon.com
as of June 19, 2022 3:04 pm

Features

  • J-B Weld Muffler Seal: MufflerSeal is an iron reinforced paste designed to seal mufflers, pipe joints and exhaust systems. MufflerSeal can resists up to 700 F.
  • Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time may vary based on cold or humid work environments) or MufflerSeal can be cured through heat application. You will be able to tell when the product is cured once it is hard.
  • Projects: Mufflers, Pipe Joints and Exhaust Systems.
  • Package Weight: 12.5 ounces

J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste – 3 oz

Specifications:

J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste - 3 oz

$8.79  in stock
6 new from $8.79
2 used from $7.77
Free shipping
Amazon.com
as of June 19, 2022 3:04 pm

Features

  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs).
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel.
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes.
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters.

J-B Weld ExhaustWeld 2″ x 72″ Repair Wrap

Specifications:

J-B Weld ExhaustWeld 2" x 72" Repair Wrap

$15.99  in stock
5 used from $15.35
Free shipping
Amazon.com
as of June 19, 2022 3:04 pm

Features

  • J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs. ExhaustWeld can resist up to 1100°F once it is fully cured!
  • CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run. Without heat, ExhaustWeld will set in 20 minutes and cure in 2 hours.
  • HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!
  • APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5" x 24" piece of aluminum tape!

Forney Easy Weld 261, 140 FC-i Welder, 120V, Green

Specifications:

Forney Easy Weld 261, 140 FC-i Welder, 120V, Green

$354.12
$246.89
 in stock
11 new from $246.89
Free shipping
Amazon.com
as of June 19, 2022 3:04 pm

Features

  • EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder
  • POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate
  • PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project
  • RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire
  • WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty

J-B Weld 8297 HighHeat 500 Degree Epoxy Putty-2 Pack

Specifications:

J-B Weld 8297 HighHeat 500 Degree Epoxy Putty-2 Pack

$14.87  in stock
4 new from $14.87
Free shipping
Amazon.com
as of June 19, 2022 3:04 pm

Features

Part Number8297
Model8297

J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick – 2 oz.

Specifications:

J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz.

$7.68  in stock
5 new from $6.52
Free shipping
Amazon.com
as of June 19, 2022 3:04 pm

Features

  • J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! J-B Weld Steelstik Is Certified By The Nsf And Is Safe For Contact With Potable Water
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set And Cure Color Is Dark Grey
  • Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And Intermittent Temperatures Of 450F (232C), And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured. Steelstik Can Be Molded, Shaped, Sanded, Drilled And Tapped
  • Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc

J-B Weld High Heat Epoxy Syringe, Dark Grey

Specifications:

J-B Weld High Heat Epoxy Syringe, Dark Grey

$7.98  in stock
2 new from $7.98
Free shipping
Amazon.com
as of June 19, 2022 3:04 pm

Features

  • J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant. At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat's cure time is accelerated by heat and can cure in 1 hour at 250°F.
  • CURE AND SET TIME: At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat's cure time is accelerated by heat and can cure in 1 hour at 250°F.
  • PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant.
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass